0 items | $0.00
No products in the cart.
  1. Home . 
  2. Publications 1988 – 1999

Publications 1988 – 1999

1999

Flores A.J., Amon C.H., Shih T.I-P., Davis D.O, Willis B.P., Boundary-Layer Bleed through Micro Holes, IAA99-0880, 1999.

Guzman A.M., Amon C.H., Mass Transfer Enhancement in an Intravenous Membrane Oxygenator Induced by a Pulsating Balloon, American Society of Mechanical Engineers, Bioengineering Division, Vol. 44: 15-16, 1999.

Schmaltz K.S., Zarzalejo L.J., Amon C.H., Molten Droplet Solidification and Substrate Remelting in Microcasting Part II: Parametric Study and Effect of Dissimilar Materials, Heat and Mass Transfer, Vol. 35(1): 17-23, 1999.

Zarzalejo L.J., Schmaltz K.S., Amon C.H., Molten Droplet Solidification and Substrate Remelting in Microcasting Part I: Numerical Modeling and Experimental Verification, Heat and Mass Transfer, Vol. 34(6): 477-485, 1999.

Vesligaj M., Amon C.H., Transient Thermal Management of Temperature Fluctuations during Time Varying Workloads on Portable Electronics, IEEE Transactions on Components and Packaging Technologies, Vol. 22(4): 541-550, 1999.

Vesligaj M.J., Amon C.H., Transient Thermal Management of Portable Electronics Using Phase Change Materials and Time Varying Power Dissipation, American Society of Mechanical Engineers, EEP, Vol. 26: 2, 1999.

1998

Amon C.H., Beuth J.L., Weiss L.E., Merz R., Prinz F.B., Shape Deposition Manufacturing with Microcasting; Processing Thermal and Mechanical Issues, ASME Journal of Manufacturing Science and Engineering, Vol. 120: 656-667, 1998.

Campo A., Amon C.H., A Simple Way to Determine the Two Asymptotic Nusselt Number Expressions for In-Tube Laminar Forced Convective Flows Employing the Method of Lines, Computer Applications in Engineering Education, Vol. 6(2): 79-87, 1998.

Guzman A.M., Amon C.H., Convective Heat Transfer and Flow Mixing in Converging-Diverging Channel Flows, American Society of Mechanical Engineers, Heat Transfer Division, Vol. 361-1: 61-68, 1998.

Guzman A.M., Amon C.H., Mass Transfer Performance Evaluations of an Intravenous Membrane Oxygenator, American Society of Mechanical Engineers, Bioengineering Division, Vol. 40: 149-154, 1998.

Guzman A.M., Amon C.H., Federspiel W.J., Hattler B.G., Spectral- Element Simulations of the Flow Kinematics in an Intravenous Membrane Oxygenator, Proceedings Fourth World Congress on Computational Mechanics, Vol.II, p. 1011, 1998. Also published in Computational Mechanics, New Trends and Applications, Idelsohn, Onate & Dvorkin (Eds.), CIMNE, pp. 1-14, 1998.

Klingbeil N.W., Beuth J.L., Chin R.K., Amon C.H., Measurement and Modeling of Residual Stress-Induced Warping in Direct Metal Deposition Processes, Proceedings Solid Freeform Fabrication, pp. 367-374, 1998.

Leoni N., Amon C.H., Bayesian Surrogates for Integrating Numerical Analytical and Experimental Data for Modeling and Design: Application to Embedded Electronics in Wearable Computers, Thermomechanical Phenomena in Electronic Systems -Proceedings of the Intersociety Conference: 58-67, 1998.

Oliveira J.C., Amon C.H., Pressure-Based Semi-Analytical Solution of Radial Stokes Flows, Journal of Mathematical Analysis and Applications, Vol. 217(1): 95-114, 1998.

1997

Ambrose S.A., Amon C.H., Systematic Design of a First-Year Mechanical Engineering Course at Carnegie Mellon University, Journal of Engineering Education, Vol, 86(2): 173-181, 1997.

Amon C.H., Finger S., Merz R., Prinz F., Schmaltz K., Weiss L., Shape Deposition Manufacturing with Microcasting, Invited Paper, J. of the Japan Welding Society, Vol. 66, No. 4, pp. 64-69, 1997.

Amon C.H., Egan E., Siewiorek D., Smailagic A., System-level Thermal Management and Concurrent Design of a Wearable Multicomputer System, IEEE Transactions Comps. Pack. Manuf. Technology, Vol. 20, No. 2, pp. 128-137, 1997.

Campbell M.I., Amon C.H., Cagan J., Optimal Three-Dimensional Placement of Heat Generating Electronic Components, Journal of Electronic Packaging, Vol. 119(2): 106-113, 1997.

Egan E., Amon C.H., A Study in the Enhancement of the Thermal Conductivity of Several Polymer Composites for Embedded Electronics Applications, ASME-HTD, Vol. 344, No. 6, pp. 103-110, 1997.

Finger S., Amon C.H., Designing and Prototyping Interactive Fluid Dynamics Exhibits for the Carnegie Science Center: An Undergraduate Team Project Experience, Proceedings – Frontiers in Education Conference, Vol. 1: 366-370, 1997.

Guzman A.M., Moraga N.O., Amon C.H., Pulsatile Non-Newtonian Flow in a Double Aneurysm, American Society of Mechanical Engineers, Bioengineering Division, Vol. 36: 87-88, 1997.

Guzman A., Moraga N., Munoz J., Amon C.H., Pulsatile Non-Newtonian Flow in a Converging-Diverging Tube, AIChE Symposium Series, ed. M.S. El-Genk, Vol. 93, pp. 288-294, 1997.

Leoni N., Amon C.H., Transient Thermal Design of Wearable Computers with Embedded Electronics using Phase Change Materials, American Society of Mechanical Engineers, Heat Transfer Division, Vol. 343: 49-56, 1997.

Leoni N.J., Amon C.H., Thermal Design for Transient Operation of the TIA Wearable Computer, American Society of Mechanical Engineers, EEP, Vol. 19(2): 2151-2161, 1997.

Majumdar D., Amon C.H., Oscillatory momentum transport mechanisms in transitional complex geometry flows, Journal of Fluids Engineering, Vol. 119(1): 29-35, 1997.

Oms L.J., Torres E., Amon C.H., The Water Table: A Fluid Exhibit for the Carnegie Science Center, 27th Annual Conference Frontiers in Education Conference Proceedings, Vol. 1: 515-520, 1997.

Schmaltz K.S., Leoni N., Padmanabhan P., Amon C.H., Finger S., Weiss L.E., Investigation of Transport Phenomena in Microcasting Shape Deposition Manufacturing via Experiments Designed Using Optimal Sampling, Symposium on Manufacturing and Materials Processing, ASME HTD, Vol. 347, No. 9, pp. 241-250, 1997.

1996

Amon C.H., Finger S., Siewiorek D.P., Smailagic A., Integrating Design Education Research and Practice at Carnegie Mellon: A Multi-disciplinary Course in Wearable Computers, ASEE J. Engineering Education, pp. 279-285, 1996.

Amon C.H., Guzman A.M., Morel B., Lagrangian Chaos Eulerian Chaos and Mixing Enhancement in Converging- Diverging Channel Flows, Physics of Fluids, Vol. 8(5): 1192-1206, 1996.

Amon C.H., Schmaltz K.S., Merz R., Prinz F.B., Numerical and Experimental Investigation of Interface Bonding Via Substrate Remelting of an Impinging Molten Metal Droplet, Journal of Heat Transfer, Vol. 118(1): 164-172, 1996.

Amon C.H., Chae K., Egan E., Kasabach C., Siewiorek D.P., Smailagic A., Stivoric J., System-level Thermal Management and Concurrent System Design of a Wearable Multicomputer System, Thermal Phenomena in Electronic Systems -Proceedings of the Intersociety Conference: 46-55, 1996.

Chin R.K., Beuth J.L., Amon C.H., Thermomechanical Modeling of Molten Metal Droplet Solidification Applied to Layered Manufacturing, Mechanics of Materials, Vol. 24(4): 257-271, 1996.

Chin R.K., Beuth J.L., Amon C.H., Droplet-Level Modeling of Thermal Stresses in Layered Manufacturing Methods, American Society of Mechanical Engineers (Paper), 1996.

Chin R.K., Beuth J.L., Amon C.H., Thermomechanical Modeling of Successive Material Deposition in Layered Manufacturing, Solid Freeform Fabrication Proceedings, eds. Bourell et al., pp. 507-514, 1996.

Egan E., Amon C.H., Cooling Strategies for Embedded Electronic Components of Wearable Computers Fabricated by Shape Deposition Manufacturing, Thermal Phenomena in Electronic Systems -Proceedings of the Intersociety Conference: 13-20, 1996.

Finger S., Stivoric J., Amon C.H., Gursoz L., Prinz F., Siewiorek D., Smailagic A., Weiss L.E., Reflections on a Concurrent Design Methodology: A Case Study in Wearable Computer Design, Computer-Aided Design, Vol. 28(5): 393-404, 1996.

Guzman A.M., Amon C.H., Dynamical flow characterization of transitional and chaotic regimes in converging-diverging channels, Journal of Fluid Mechanics, Vol. 321: 25-57, 1996.

Oliveira J.C., Amon C.H., Evolution of Nonlinear Instabilities in Radial Flows, Encit 96/Latcym 96, Vol 1., pp. 61-66 and Vol. 3, pp. 1803-07, Florianopolis, Brasil, 1996.

Osio I.G., Amon C.H., An Engineering Design Methodology with Bayesian Surrogates and Optimal Sampling, Research in Engineering Design – Theory, Applications, and Concurrent Engineering, Vol. 8(4): 189-206, 1996.

1995

Schmaltz K.S., Amon C.H., Thermal Issues in Microcasting Shape Deposition Manufacturing, TMS Annual Meeting: 145-157, 1995.

Amon C.H., Finger S., Siewiorek D.P., Smailagic A., Integration of Design Education Research and Practice at Carnegie Mellon University: A Multi-disciplinary Course in Wearable Computer Design, Proceedings – Frontiers in Education Conference, Vol. 2: 658-666, 1995.

Amon C.H., Nigen J.S., Siewiorek D.P., Smailagic A., Stivoric J., Concurrent Design and Analysis of the Navigator Wearable Computer System: The Thermal Perspective, IEEE transactions on components, packaging, and manufacturing technology. Part A, Vol. 18(3): 567-577, 1995.

Amon C.H., Spectral Element-Fourier Method for Unsteady Conjugate Heat Transfer in Complex Geometry Flows, Journal of thermophysics and heat transfer, Vol. 9(2): 247-253, 1995.

Campbell M.I., Amon C.H., Cagan J., Szykman S., Electronic Component Placement Using Simulated Annealing Under Thermal Constraints, American Society of Mechanical Engineers, Heat Transfer Division, Vol. 319: 155-162, 1995.

Chin R.K., Beuth J.L., Amon C.H., Control of Residual Thermal Stresses in Shape Deposition Manufacturing, Solid Freeform Fabrication Proceedings, eds. H.L. Marcus et al., pp. 221-228, 1995.

Nigen J.S., Amon C.H., Effect of Material Composition and Localized Heat Generation on Time-Dependent Conjugate Heat Transport, International Journal of Heat and Mass Transfer, Vol. 38(9): 1565-1576, 1995.

PPrinz F.B., Weiss L.E., Amon C.H., Beuth J.L., Processing Thermal and Mechanical Issues in Shape Deposition Manufacturing, Solid Freeform Fabrication Proceedings, eds. H.L. Marcus et al., pp. 118-129, 1995.

Schmaltz K.S., Amon C.H., Experimental Verification of an Impinging Molten Metal Droplet Numerical Simulation, American Society of Mechanical Engineers, Heat Transfer Division, Vol. 317-1: 219-226, 1995.

1994

Amon C.H., Numerical Prediction of Conjugate Conduction/Convection Heat Transfer in Multimaterial Electronic Components, American Society of Mechanical Engineers, Heat Transfer Division, Vol. 292: 37-47, 1994.

Amon C.H., Finger S., Prinz F.B., Weiss L.E., Modeling Novel Manufacturing Processes, American Society of Mechanical Engineers, Production Engineering Division (Publication) PED, Vol. 68-2: 535-546, 1994.

Amon C.H., Merz R., Prinz F.B., Schmaltz K.S., Thermal Modeling and Experimental Testing of MD* Spray Shape Deposition Processes, Proceedings 10th International Heat Transfer Conference, Vol. 7, pp. 321-327, Brighton, UK, 1994.

Amon C.H., Computational Methodologies as a Research Tool for Concurrent Thermal Design Engineering, ISAC ’94, International Symposium on Advanced Computing, Computational Mechanics for Electronic Devices/Components J.M., pp. 33-52, Invited Paper, Japan, 1994.

Guzman A.M., Amon C.H., Periodic Quasiperiodic and Chaotic Regimes in Converging-Diverging Open Channel Flows, American Society of Mechanical Engineers, Heat Transfer Division, Vol. 298: 47-56, 1994.

Guzman A.M., Amon C.H., Transition to Chaos in Converging-Diverging Channel Flows: Ruelle-Takens-Newhouse Scenario, Physics of Fluids, Vol. 6(6): 1994-2002, 1994.

Nigen J.S., Amon C.H., Time-Dependent Conjugate Heat Transfer Characteristics of Self-Sustained Oscillatory Flows in a Grooved Channel, Journal of Fluids Engineering, Vol. 116(3): 499-506, 1994.

1993

Amon C., Beuth J., Kirchner H., Merz R., Prinz F., Schmaltz K., Weiss L., Material Issues in Layered Forming, Proceedings 1993 Solid Freeform Fabrication Symp., eds. H.L. Marcus et al., pp. 1-10, Austin, TX, 1993.

Amon C.H., Spectral Element-Fourier Method for Transitional Flows in Complex Geometries, AIAA journal, Vol. 31(1): 42-48, 1993.

Amon C.H., Mikic B.B., Computational Methodologies as a Research Tool in Complex Forced Convection Heat Transfer Systems: Present Status and Future Expectations, 1991 US/JAPAN Joint Seminar on Computers in Heat Transfer Sciences. Reprinted in Computers and Computing in Heat Transfer Science and Engineering, pp. 61-86, CRC Press, Begell House, 1993.

Guzman A.M., Amon C.H., Flow Patterns and Forced Convective Heat Transfer in Converging-Diverging Channels American Society of Mechanical Engineers, Heat Transfer Division, Vol. 237: 43-53, 1993.

Majumdar D., Amon C.H., Physics of Heat and Momentum Transfer in Transitional Flows in Complex Geometries, American Society of Mechanical Engineers, Heat Transfer Division, Vol. 246: 75-83, 1993.

Nigen J.S., Amon C.H., Forced Convective Cooling Enhancement of Electronic Package Configurations through Self-Sustained Oscillatory Flows, Journal of Electronic Packaging, Vol. 115(4): 356-365, 1993.

1992

Amon C.H., Heat Transfer Enhancement by Flow Destabilization in Electronic Chip Configurations, Journal of Electronic Packaging, Vol. 114(1): 35-40, 1992.

Majumdar D., Amon C.H., Herman C.V., Mayinger F., Mikic B.B., Visualization of High-Frequency Thermo-Fluid Phenomena Using Real-Time Holographic Interferometry and Numerical Animation, Computational and Experimental Flow Visualization, ASME HTD, Vol. 206, No. 1, pp. 25-31, 1992.

Majumdar D., Amon C.H., Heat and Momentum Transport in Oscillatory Viscous Flows, Journal of Heat Transfer, Vol. 114(4): 866-873, 1992.

Nigen J., Amon C.H., Conjugate Forced Convective Effects of Complex Recirculating Self-Sustained Oscillatory Flow, Fundamentals of Forced Convection Heat Transfer, ASME HTD, Vol. 210, pp. 91-98, 1992.

Nigen I.S., Amon C.H., Concurrent Thermal Designs of PCBs: Balancing Accuracy with Time Constraints, IEEE Transactions on Components, Hybrids, and Manufacturing Technology, Vol. 15(5): 850-859, 1992.

1991

Amon C.H., Majumdar D., Mikic B.B., Herman C.V., Mayinger F., Sekulic D.P., Experimental and Numerical Investigation of Oscillatory Flow and Thermal Phenomena in Communicating Channels, American Society of Mechanical Engineers, Heat Transfer Division, Vol. 170: 25-34, 1991.

Amon C.H., Mikic B.B., Spectral Element Simulations of Unsteady Forced Convective Heat Transfer: Application to Compact Heat Exchanger Geometries, Numerical Heat Transfer; Part A: Applications, Vol. 19(1): 1-19, 1991.

Nigen J.S., Amon C.H., Forced Convective Cooling Enhancement of Surface-Mounted Electronic Package Configurations through Self-Sustained Oscillatory Flows, American Society of Mechanical Engineers, Heat Transfer Division, Vol. 171: 39-46, 1991.

1990

Amon C.H., Mikic B.B., Numerical and Experimental Visualization of Fast-Evolving Heat Transfer Phenomena in Self-Sustained Oscillatory Flows, Journal of Thermophysics and Heat Transfer, Vol. 4(2): 239-246, 1990.

Amon C.H., Spectral Element-Fourier Approximation for the Navier-Stokes Equations: Some Aspects on Parallel Implementation, American Society of Mechanical Engineers, Heat Transfer Division, Vol. 133: 11-18, 1990.

Amon C.H., Mikic B.B., Numerical Prediction of Convective Heat Transfer in Self-Sustained Oscillatory Flows, Journal of Thermophysics and Heat Transfer, Vol. 4(2): 239-246, 1990.

1989

Amon C.H., Patera A.T., Numerical Calculation of Stable Three-Dimensional Tertiary States in Grooved-Channel Flow, Physics of Fluids A, Vol. 1(12): 2005-2009, 1989.

Amon C.H., Mikic B.B., Spectral Element Simulations of Forced Convective Heat Transfer: Application to Supercritical Slotted Channel Flows, American Society of Mechanical Engineers, Heat Transfer Division, Vol. 110: 175-183, 1989.

Amon C.H., Mikic B.B., Flow Pattern and Heat Transfer Enhancement in Self-Sustained Oscillatory Flows, AIAA Paper 89-0428, Twenty-Seventh Aerospace Science Meeting R.n., Nevada, January 1989.

1988

Amon C.H., Mikic B.B., Korin E., Effect of Oscillatory Flow on Heat Removal from Circular Fins, Cooling Technology for Electronic Equipment, ed. W. Aung, Hemisphere Publishing Corp., New York, pp. 125-138, 1988.

Karniadakis G.E., Amon C.H., Stability Calculations for Wall-Bounded Flows in Complex Geometries, Advances in Computer Methods for Partial Differential Equations VI, eds. R. Vichnevetsky and R.S. Stepleman, IMACS, New Jersey, pp. 525-534, 1988.

Ratts E., Amon C.H., Mikic B.B., Patera A.T., Cooling Enhancement of Forced Convection Air Cooled Chip Array through Flow Modulation Induced by Vortex-Shedding Cylinders in Cross-Flow, Cooling Technology for Electronic Equipment, ed. W. Aung, Hemisphere Publishing Corp., New York, pp. 183-194, 1988.